
Double Ended Pin Vice
This double ended pin vice is a useful tool when you want to do something by hand that may require a more precise application. Swiss made by Horotec
Hold it as you would a pen for hand carving and engraving on glass, stone or wood with a diamond ball burr. Use it for bead reaming with a diamond point burr, hold cup burrs for rounding off the ends of wires. Use it to stipple engrave on glass, or create fine hair lines or fur with a diamond point bur. Ideal for holding many items such as drill bits, burrs, cutting broaches, taps, wires, screws and winding stems.
Each end has a collet. Unscrew so that the teeth inside loosen and then place your drill, screw, reamer or burr inside and re-tighten. Two collets, one holds up to 1.40mm and the other end 1.30mm - 2.80mm
When you don't want to use an electric drill, or are perhaps unable to use a drill due to health and safety issues, these little pin vices will do the trick.
Technical
Double ended pin vice with hollow nickel plated handle. 2 knurled round heads and 2 steel chucks.
- Length: 110mm
Questions & Answers
Ask a question using the form below
Other questions and our answers
What is the smallest drill size that the pin vice will hold?
David Barrowclough
There are two collets, one holds from 0 up to 1.40mm and the other end 1.30mm - 2.80mm.