Small Carbide Ball Burrs (0.5mm - 2.30mm) 2.35mm shank
These precision made solid tungsten carbide ball burrs are more durable, will cut for longer, and cut cleaner than regular HSS, high speed steel burrs. Ideal for creating micro settings, engraving metal, carving wood, bone and shell, carving plastics, carving wax and for texturing and shaping metals.
With a 2.35mm (3/32") shank and overall length of 44.5mm they can be used in a rotary tool (i.e Dremel), pendant motor, flexible shaft, bench press or micro motor.
- Wood carving
- Micro Pave settings in Metal
- Texturing and shaping metals
- Carving and grinding bone, egg shell, shell, fossil, tagua nut and antler
- Shaping and cutting plastics
Sold in sizes: 0.5, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.10, 2.30mm or as a set of 9 (1 of each size)
Precision solid tungsten carbide ball burrs
- Shank: 2.35mm (3/32")
- Overall length: approx 44.5mm
Questions & Answers
Ask a question using the form below
Other questions and our answers
just a quick question would carbide ball burrs be suitable for engraving stainless steel and is there a lubricant that could help with engraving process ?
Yes our carbide burrs work well on stainless steel, you can use a regular cutting fluid or water will work too.
Any further questions just let us know.
Will this fit in a drill with a two piece collet that is 1/8"?
Hi Jennifer, thanks for your question. These carbide ball burrs have a 3/32" (2.35mm) shank. 1/8" is equal to 3.175mm so if the collet tightens down then yes you will be able to hold these. Otherwise you will need an adjustable chuck (one that tightens and loosens to hold various shank sizes) Depending on the sort of drill you have, most have a chuck available to purchase that will atatcht to the drill. Dremel for instance have a Dremel Multi Chuck that does the job. I hope this helps but if you have further questions, please ask