Mini Rubber Silicone Pin Polishers (Pack of 6)
These Small EVEFLEX Rubber Silicone pin polishers come in sizes 3mm x 23mm (the most popular size) or 1mm x 10mm. They are for use on a variety of non-precious metals, gold, stone and glass. These abrasives are ideal for polishing difficult to reach areas without the need to use additional paste or compound.
Choose either a Set of 6 assorted grades or a 6 pack of the same grade from:
- Dark Brown: Medium, X-Hard. 400#
- Blue: Extra Coarse for quick removal of material. 500#
- Dark Grey: Coarse. 600#
- Red: Medium for Pre-Polish, removes scratches and leaves a smooth surface. 700#
- Green: Fine for a high shine. 800#
- Fawn: Extra Fine for a super shine. 900#
The 3mm x 23mm set of 6 pins containing 1 of each grade is our most popular combination, allowing you to work your way through the grades of each polisher to achieve the desired finish on your work.
Please note the mandrel is not included.
They fit easily into the EVE Pin Mandrel by unscrewing, inserting the polisher and re-screwing on the uppermost part of the mandrel. Recommended speed of between 10,000 - 15,000RPM. Do not exceed 30,000RPM
Read on for further usage and description....
N.B: No need to use an additional paste or compound with these.
Ideal for use by jewellers, goldsmiths, glass engravers, ceramicists and on all non-precious metals and gold. Recommended speed of between 10,000 - 15,000RPM. Do not exceed 30,000RPM
These cylinder shaped rubber abrasives are thin enough to polish areas with difficult access. They are made from solid silicone abrasive and are best used by working your way through the grades until you've achieved the required finish.
Will leave a perfect finish
"The rubber/grit mini posts are very good and can be filed to a point to suit both my Cameo and intaglio carving on Whitby Jet, and on stones up to 5 Moh scale such as Turquoise" ~ Hal Redvers-Jones. The Whitby Jet Heritage Centre.
Micron (µ), Grit (#) & Mesh Conversion Chart
EVEFLEX Polishers - Synthetic rubber bonding
3mm Pin Polishers:
- Length: 23mm
- Diameter: 3mm
1mm Pin Polishers:
- Length: 10mm
- Diameter: 1mm
Questions & Answers
Ask a question using the form below
Other questions and our answers
do you know if these polishers would work on a carved egg shell such as emu ?
They would be very suitable to use on carved egg shell. My advice would be to file down the end into a point so you can polish the intricately carved areas.