Medium Diamond Files
Our 600 grit diamond needle files are unique, they have been designed and produced with precision in mind. Use for roughing out and removing heavy pitting or finishing and shaping of hard materials.
- Crossing (600 grit)
- Half Round (600 grit)
- Oval (600 grit)
- Knife (600 grit)
How to use our Medium Diamond Needle Files
Our diamond needle files can be used either wet or dry, they will last longer when used wet but it is understood that this isn't always practical when working on a delicate watch or clock part. As with all our products allow the tool to do the work and don't apply too much pressure especially if working on a corner or sharp edge.
The many uses for our diamond files:
- Use the tip for detailed areas such as ring shanks
- Removing excess solder
- Shaping precious stones for jewellery
- Sharpening carbide cutting tools
- Enlarging holes
- Fitting clock and watch glasses
- Refacing clock & pallets
- Re-pivoting clock and watches
- Beveling cut crystal glasses
- Sharpening household objects
- Cross graining burnishing tools
- Sharpening fishing hooks
Diamond 600 grit is precisely electroplated onto a steel blank with a plastic handle
- Overall length: 140mm
- Shaft: 3mm
- Diamond length: 70mm
- Handle diameter: 4mm
Questions & Answers
Ask a question using the form below
Other questions and our answers
I’d like to cut and smooth some tungsten carbide , will these discs do the job?
The diamond slitting discs would be perfect for the cutting of your carbide. To smooth, try our 600 grit diamond files. To polish the tungsten carbide you can use our diamond grinding paste.