The Lesley Pyke Glass Engraving Starter Kit
This 12 piece Glass Engraving Starter kit is the result of an exciting collaboration with highly acclaimed Glass Engraver, Lesley Pyke.
The kit contains the essential items you will need to begin glass engraving as recommended by Lesley Pyke. Diamond burrs to engrave, green and Arkansas stones to achieve depth and shade and a small variety of polishers. All the items have a 2.35mm shank. Ideal for your Rotary Tool (you will need a 2.3mm collet or an adjustable chuck) , hobby engraver or Micro Motor.
Kit contains the following:
- 1 x 1.5mm Diamond Ball Burr
- 1 x 2mm Diamond Ball Burr
- 1 x 3mm Diamond Ball Burr
- 1 x Taper Mandrel
- 1 x Cylinder shaped polisher, Grey
- 1 x Pin Mandrel
- 1 x Pin polisher, Brown
- 1 x 8mm Step Screw mandrel
- 1 x Wheel shaped polisher, Black
- 1 x 5mm Flame Green Silicon Carbide Stone Burr
- 1 x 0.8mm Diamond Point Burr (Rats Tail)
- 1 x 3mm Ball, White Arkansas Stone Burr
For further information on how to use these glass etching tools you may like to read our article '5 Essential Beginners Glass Engraving Tools'
Or 'Learn with Lesley' with her step by step Glass Engraving Lessons.
If you would like a similar kit but with a wider variety of burrs and polishers, please take a look at our 'Experimental Glass Engraving Kit'
|The Lesley Pyke Glass Engraving Starter Kit|
- Diamond Ball Burr: 1.5mm diameter, 45mm overall length, 240 grit, 2.35mm shank DBB150
- Diamond Ball Burr: 2.0mm diameter, 45mm overall length, 240 grit, 2.35mm shank DBB200
- Diamond Ball Burr: 3mm diameter, 45mm overall length, 180 grit, 2.35mm shank DBB300
- Taper Mandrel: 3mm tapers to a 1.7mm point, 2.35mm shank TM1
- Eveflex Technik Rubber Cylinder Polisher: 7mm x 20mm. Dark Grey EFTUM600
- Pin Mandrel: to hold 3mm Pin Polisher, 2.35mm shank PM1
- Mini Rubber Silicone Pin Polisher: 3mm x 23mm. Dark Brown SPP1BROWN
- Screw Mandrel: 8mm head SM8STEP
- Mini Rubber Silicone Polisher, Wheel: 22mm x 3mm, Black MSPWB
- Green Silicon Carbide Stone Burr, Flame: 5mm diameter, 44mm overall length, 2.35mm shank SCFL
- Diamond Point Burr (Rats Tail): 0.8mm diameter, 45mm overall length, 2.35mm shank DPB08
- White Arkansas Stone Burr, Ball: 3mm diameter, 2.35mm shank ASB1