Diamond Lens Burrs
- 5mm diameter
- 2mm depth
- 2.35mm shank (3/32")
These diamond lens burrs are coated with a high quality, medium diamond grit and mounted onto a 2.35mm (3//32") shank, suitable for pendant drills, Micro Motors and Dremel type rotary tools.
Use the convex surface to shape and round edges, use the edges to cut in, add grooves and V-cuts into all your glass engraving work, stone carving and wood carvings. Also for use on ceramic, shell, antler, porcelain and fossil.
To get the best life and usage out of your burrs use with a little water, either via a drip feed or a sponge near by to occasionally apply to your work. Be careful to keep the drill speed slow.
Always wear sufficient safety goggles and face mask and be careful to not exceed a drill speed of 12,000rpm, using very little pressure.
Diamond grit is precisely double electroplated onto a steel shank
- Diameter: 5mm
- Depth: 2mm
- Overall length: 44mm
- Shank: 2.35mm (3.32")