Small Diamond Ball Burrs - 2.35mm Shank
Bulk Discounts
| Quantity Purchased | Price |
| 1 - 2 | $6.41 |
| 3 - 9 | $5.55 |
| 10 + | $4.96 |
Choose from sizes: 0.8mm, 1.0mm, 1.5mm, 1.8mm, 2.0mm, 2.5mm, 3.0mm
Our popular Small Diamond Coated Ball Burs sometimes referred to as Point burrs are for engraving and carving on all hard materials such as glass, stone, ceramic, porcelain, shell and very hard woods. 2.35mm shank.
***Sold Individually***
If you would like to order a Set of 7 (1 of each size) please click this link
Description
- 2.35mm Shank (3/32")
- For carving, engraving, shaping and texturing
- For use on all hard materials such as glass, stone, hard wood, ceramics, shell
- Slow drill speed, 5,000RPM, not exceeding 12,000RPM
- Use with plenty of cold water
- Use with low pressure, let the drill do the work
- Use in a hand held drill, hobby drill with the correct collet or adjustable chuck, pendant motor, micro motor or drill press
If you're looking to carve metal, antler or wood, try our small carbide ball burrs, also on a 2.35mm shank.
Always wear sufficient safety goggles and a face mask and be careful not to exceed a drill speed of 12,000rpm and use with very little to no pressure.
Disclaimer. Using rotary tools near water has never been, to the best of our knowledge, endorsed by any of the rotary tool manufacturers. If you do choose to drill near water or with attachments under water connected to your drill then you do so at your own risk. Please be aware that mixing electricity and water can be very dangerous.
Technical
Diamond grit is precisely electroplated onto a steel shank
Sizes: 0.8mm, 1mm, 1.5mm,1.8mm, 2mm, 2.5mm
Overall length: 45.5 mm
Grit: 240
Size: 3mm
Overall length: 45.5 mm
Grit: 180
