Glass Engraving Kit (Bare Minimum)
This kit contains all the essential items you will need to begin glass engraving. Diamond burrs to engrave, green and Arkansas stones to achieve depth and shade and a small variety of polishers. All the items have a 2.35mm shank. Ideal for your Rotary Tool (you will need a 2.3mm collet or an adjustable chuck) , hobby engraver or Micro Motor.
Kit contains the following:
- 1 x 0.8mm Diamond Ball Burr
- 1 x 3mm Diamond Ball Burr
- 1 x 5mm Flame Green Silicon Carbide Stone Burr
- 1 x 3mm Ball, White Arkansas Stone Burr
- 1 x Pack of 4, Bullet shaped Mini Rubber Silicone Polishers. 1 of each grade
- 1 x Taper Mandrel (for holding the silicone polishers)
- 1 x Bullet, Grey Rubber Silicone Polisher
For further information on how to use these glass etching tools you may like to read our article '5 Essential Beginners Glass Engraving Tools'
If you would like a similar kit but with a wider variety of burrs and polishers, please take a look at our 'Experimental Glass Engraving Kit'
"I love my kit for glass engraving, it's given my work so many more dimensions. I love the white stone, still learning so trying different things but the set was great. I've been engraving for years but changed what I was doing when I read your tips for engraving and bought the kit" - Ricki Lee
|Bare Minimum Glass Engraving Set|
Diamond Ball Burr: 0.8mm diameter, 45mm overall length, 240 grit, 2.35mm shank DBB08
Diamond Ball Burr: 3mm diameter, 45mm overall length, 180 grit, 2.35mm shank DBB300
Green Silicon Carbide Stone Burr, Flame: 5mm 44mm overall length, 2.35mm shank SCFL
White Arkansas Stone Burr, Ball: 3mm diameter, 2.35mm shank ASB1
Mini Rubber Silicone Polishers, Bullet: 6mm diameter, 25mm overall length MSPBMI
Taper Mandrel: 3mm tapers to a 1.7mm point, 2.35mm shank TM1
Grey Rubber Silicone Polisher, Bullet: 10mm diameter, 24mm overall length, 2.35mm shank GRSPB
Questions & Answers
Ask a question using the form below
Other questions and our answers
so does 2.35 mm fit my 3/32 tool?
2.35mm equates to 3/32 inches, so yes, these will fit your tool.
Hi I'm just wondering if you deliver to ireland . Iv just started to glass engrave and I watch a video on you tube and he use your company for materials. I would appreciate any help you can offer me in some equitment .
Yes, we deliver worldwide and many of our customers are from Ireland. Please see this page for the delivery times, info and prices:
Would these fit a dremel?
Yes these will fit the Dremel, you just need to make sure you have the Dremel Multi Chuck in order to hold the bits, burrs and polishers. When you buy a Dremel they don't usually come with this chuck.