Back In Stock! Cutting Broaches Set of 12 (0.05mm - 0.55mm) Take a look

FREE UK Delivery Over £60

Dremel 4486 Multi Chuck


The Dremel Multi Chuck allows you to quickly and easily change accessory bits on Dremel rotary tools without changing collets or using a wrench. This Dremel chuck will accept all accessory bits with 0.4mm to 3.2mm shanks. (1/64" to 1/8" shanks)

Tip: If you use any accessories with a 2.35mm (3/32") shank size or change drill bit sizes often then the Dremel Multi Chuck is for you!

Compatible for use with rotary tool models Dremel 3000, 4000, 8220, Lite, 4300, Stylo+, 4250, 8260, Micro, 7700, 8100, 8200, 200. 

Also for use with the following Dremel attachments: Dremel Flexible Shaft 225, and Dremel Right Angle Attachment 575. **Not for use with 4200.

***This is a genuine Dremel Multi Chuck 4486 in original Dremel packaging. Beware of cheap imitations***

"The Dremel Multi Chuck is fantastic and I use it all the time, saves a tonne of time changing collets" - Gavan Murphy

View Product Video

Earn 0 reward points
$0.00 $18.43
Out Of Stock
Add To Wishlist

Want to be notified when this product is back in stock?
Complete the form below and we'll send you an email when it is.


  • Dimensions: 10 x 5.1 x 2.5cm
  • Weight: 18g
  • Part Number: 4486
  • Brand: Dremel

Questions & Answers

Ask a question using the form below

Display my question on your website (untick to keep private)

Other questions and our answers

Just got a Dremel 3000 for Christmas. Ordered part#4486(multi chuck). The chuck doesn't screw on the 3000. Too big! How do I get this to work?

Gus Stofflet

Hi Gus, 

You need to remove the attachment that is currently on your Dremel 3000 leaving you with just the thread. Then you will be able to screw on your Multi Chuck.
There is a link to a very short demo explaining how to attach your Dremel Multi Chuck on the product page, or alternatively follow this You Tube link:

I need a drill and small bits to put small holes into pebbles, these need to be wet (sat in a shallow tray of water to do this) is this item suitable? Thank you Samantha :)

Samantha Edwarda

Yes, we have just the tools. Use a Dremel 3000 drill with the Dremel collet nut kit or a Dremel Multi Chuck and some small diamond drill bits. You might like the Diamond Drill Bits set for your Dremel. This set contains 2 x small diamond drill bits and 2 x small diamond core drills, in different sizes, all ideal for drilling holes in pebbles.  Our article on How to Drill Pebbles might also be helpful for you. If you want to buy the diamond drill bits individually without being part of the set please click here.

Hi, I want to order diamond bits to drill 1mm holes in 500um thick borosilicate glass wafer. Could you please tell me if 0.75mm diameter drill bit would be perfect for that or not. Also, what other items I would need to drill hole along with drilling machine. Besides, could you suggest me which drilling machine would be sufficient for this job. Thank you. Best Regards Deepika Sharma

Deepika Sharma

Hi Deepika,

Good to hear from you. We recommend using a Dremel 3000 drill with a Dremel Multi Chuck and use either the small diamond drill bits or the small diamond core drills. If you are new to drilling holes in glass we recommend trying the core drills first. The size of the core drill indicates the size of the hole you will achieve, so if you need a 1mm hole, you will need to purchase the 1mm diamond core drills. All the best with the project.

Hello, I have enjoyed your website and blog! I have a Dremel Micro 8050 N/18. Would this drill bit set fit? Thank you, Lauren Sayers


Thanks Lauren, that's great to hear.  The Dremel Multi chuck can be used with their rotary tool models 4000, 400, 3000, 398, 395, 300, 285, 275, 200, 100, 8220, 8200, 800, 780, 770, 7700, 750, 8050. 

So, yes this will be compatible with your rotary tool. Happy Drilling!

The item has been added to your basket

Continue Shopping
Proceed To Checkout
Receive our Newsletter and exclusive discounts
Ecommerce Platform by ShopWired