Diamond Wire Hand Saw Blades (Pack of 3)
These 320-grit-coated diamond wire saw blades enable you to cut glass, stone, precious and semi-precious stones, ceramic, fibreglass, fossil, bone, shell, and composite materials. Diamond saw blades are the ideal solution for cutting your cabochons and sea glass to size and in any shape required.
- 0.25mm diameter x 152.4mm (6 inches) - Pack of 3
Use wet in a piercing saw frame slowly, with a back-and-forth action. The diamond wire saw blades ensure precision clean cuts.
The life of the diamond scroll saw blade depends on many factors, including the speed with which you use the wire, the amount of pressure applied, and the hardness and thickness of the material being cut.
**Piercing Saw Frame Not Included**
Different lengths of hand saw blades are available upon request. Please ask.
" I am amazed by the ease of use and the results. Without any force at all, letting the blade do all the work and keeping everything wet, the diamond wire cut through a Roman glass bead 7.4 mm thick at the thickest point very fast. The relatively soft beach stones we have here were a sinch, cut through it like butter. I also cut some kyanite and amazonite very easily.
I use the Roman flat glass shards a lot, and being able to cut them with some precision and less danger of breaking is great" - Alek Lindus.
For further help, you may like to read our tutorial: 'How To Easily Cut & Shape Sea Glass and Stones Using Diamond Wire Hand Saw Blades'
Electroplated/coated Diamond Wire Hand Saw Blades
- Thickness/diameter: 0.25mm
- Length: 152.4mm (6 inches)
- Grit/abrasive: 320 grit
Questions & Answers
Ask a question using the form below
Other questions and our answers
can diamond wire hand saw be used for cutting copper and other types of metals
Diamond saw blades should only be used for cutting stone, glass, shell, bone ceramic, porcelain and glazed tile.
Will the product bend without snapping?
Yes, the diamond wire will bend without snapping.
Suhail fayez ifraitekh
I would like to know can I use the wired diamond with machine and how much the diameter for the wire
The diameter of the wire is 0.25mm. We recommend using these in a piercing saw frame. If these are used in a machine, the speed will be too high and cause the diamond coating to burn or wear off too quickly.
I am unfamiliar with hand saws, etc. will the diamond blades work with the jewelers saw? Thank you
Yes, the jewelers saw is ideal to use with the Diamond saw blades. You may be interested in our article 'How To Easily Cut & Shape Sea Glass and Stones Using Diamond Wire Hand Saw Blades'.