Diamond Wheel Burrs
- 6mm x 2mm
- 2.35mm shank
These professional grinding wheels have a double layer of diamond coated onto a stainless steel shaft. These will add shape and depth to your carvings and engravings. They can be used on many materials such as stone, glass, ceramic, porcelain, gemstone, shell and hard woods.
Choose from either:
- 100 # grit - coarse
- 170 # grit - medium
To get the best life and usage out of your burrs use with a little water, either via a drip feed or a sponge near by to occasionally apply to your work. Be careful to keep the drill speed slow to begin with.
Always wear sufficient safety goggles and face mask and be careful to not exceed a drill speed of 12,000rpm and very little to no pressure.
You might also like to read some of our helpful articles such as 12 Things you Should Know About Diamond Drill Bits.
"A good bur for deep lines" - Lesley Pyke Glass Engraving Ltd
Diamond grit is precisely double electroplated onto a steel shank
- Diameter: 6mm
- Depth: 2mm
- Overall length: 45.5mm
- Shank: 2.35mm