Small Diamond Disc Burrs
|1 - 2||$5.77|
|3 - 9||$5.37|
Sizes available: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm
These Diamond Coated Disc Burrs have a 2.35mm (3/32") shank. Diamonds are coated on the edge of the wheel as well as the top, allowing you to engrave, shape and carve in different ways on many hard materials such as glass, stone, ceramic and porcelain.
The edges of the disk burr are Ideal for making grooves when carving in glass, stone and for bird carving in wood, also helpful in wire wrapping jewellery projects for making channels to help the wire sit and secure your material well.
Use the top to grind and shape or create shallow circles.
Diamond grit is precisely electroplated onto a steel shank
- Diameter: 0.5mm-3.00mm
- Overall length: 42mm
- Shank: 2.35mm
Questions & Answers
Ask a question using the form below
Other questions and our answers
how thick is the wheel (for the 3mm diameter)?
Also is the wheel the same thickness all the way into the base?
Is the wheel edge on the outside diameter round or square?
These are approximately 0.8mm thick, the same thickness from the edge to the base. They are rounded at the edges.