Clicky

FREE UK Delivery Over £60

Diamond Cone Burrs

DCONEB

Choose sizes from 3mm - 10mm

These Diamond Coated Cone Burrs are perfect for engraving, carving and sculpting in stone, glass, ceramic, porcelain and hard wood. Use in your pendant drill, rotary hand piece, hobby drill, engraver, micro motor or die grinder. Use with plenty of cold water, wearing protective safety goggles and face mask. Use with little pressure and do not exceed a drill speed of 12,000RPM. 

  • 3mm x 15mm, 3mm shank, 150 # (Medium)
  • 4mm x 15mm, 2.35mm shank, 150 # (Medium)
  • 5mm x 20mm, 5mm shank, 120 # (Coarse-Medium)
  • 6mm x 20mm, 6mm shank, 120 # (Coarse-Medium)
  • 8mm x 20mm, 6mm shank, 80 # (Coarse)
  • 10mm x 25mm, 6mm shank, 80 # (Coarse)

Helpful Note: If you are looking for a very fine point, you might like to try our Diamond Point Burs (These come in sizes as small as 0.6mm, 0.8mm...) Or for bevel edges to holes, try our Diamond Countersink Burrs

Earn 0 reward points
$0.00 $6.11

Size

QTY:
Out Of Stock
Add To Wishlist

Want to be notified when this product is back in stock?
Complete the form below and we'll send you an email when it is.

Technical

Diamond grit is precisely electroplated onto a steel shank

Diameter: 3mm at base, tapering to a point

  • Diamond coated length: 15mm
  • Overall length: 50mm
  • Shank: 3mm
  • Grit 150

Diameter: 4mm at base, tapering to a point

  • Diamond coated length: 15mm
  • Overall length: 42mm
  • Shank: 2.35mm
  • Grit 150

Diameter: 5mm at base, tapering to a point

  • Diamond coated length: 20mm
  • Overall length: 60mm
  • Shank: 5mm
  • Grit 120

Diameter: 6mm at base, tapering to a point

  • Diamond coated length: 20mm
  • Overall length: 70mm
  • Shank: 6mm
  • Grit 120

Diameter: 8mm at base, tapering to a point

  • Diamond coated length: 20mm
  • Overall length: 62mm
  • Shank: 6mm
  • Grit 80

Diameter: 10mm 80# (Coarse) at base, tapering to a point

  • Diamond coated length: 25mm
  • Overall length: 80mm
  • Shank: 6mm
  • Grit 80


Customer Reviews

Questions & Answers

Ask a question using the form below

Display my question on your website (untick to keep private)

Other questions and our answers

Would these work with a dremel 4300? Thank you for your time.

lisa

Yes, so long as you have an adjustable chuck on the 4300, otherwise you will need the Dremel Multi Chuck. Choose the diamond burrs with either a 2.35mm or 3mm shank. 


The item has been added to your basket

Continue Shopping
Proceed To Checkout
Receive our Newsletter and exclusive discounts