Diamond Bullet Burrs 120# Medium
- 2.35mm shank (3/32")
- 120# Medium diamond grit coating
Bullet shaped, diamond electroplated burs can be used on many materials such as glass, stone, hard wood, ceramic, shell and porcelain. To get the best life and usage out of your burrs use with a little water before or during use. Can be used in any rotary tool or flex shaft. Mounted on a 2.35mm (3/32") shank.
Always wear sufficient safety goggles and a face mask and be careful not to exceed a drill speed of 12,000rpm. Use with very little to no pressure.
Looking for a finer grade? a different size? brazed diamond? or sintered diamond bullet burrs? Take a look at our whole range of Diamond Bullet burrs which include 400 grit, fine burrs from 1mm upwards.
Technical
High quality 120 grit (medium) Diamond grit is electroplated onto a 2.35mm (3/32") steel shank.
Diameter: 3mm
- Overall Length: 45mm
- Working diamond length: 13mm
Diameter: 6mm
- Overall Length: 45mm
- Working diamond length: 13mm
Diameter: 8mm
- Overall Length: 45mm
- Working diamond length: 13mm