Carbide Pivot Burnisher Wheel
These are the long awaited Tungsten Carbide Burnishing Wheels that are used together with the build-your-own pivot polishing machine series included in the British Horological Institutes (BHI) Journal.
Quickly and accurately burnish both clock and watch pivots to a beautiful finish. The wheels are produced with a small radius on the one side so they can be used on small conical pivots as well as square shouldered pivots.
NB. You can also purchase the 6 article set that was included in 6 separate issues of the Horological Journal on how to build the pivot burnisher machine. Please click this link here.
Designed, developed and prototype made by Jim Arnfield FBHI.
Following several prototypes and years of testing and design Eternal Tools has finally produced the ideal Tungsten Carbide Burnishing Wheel for finishing your pivots.
The burnishing wheel has been cross-grained to produce an excellent finish on both clock and watch pivots. The edges are very keen and the wheel has been precision turned.
NB. Care must be taken to measure the wheel before building the machine to ensure you get the correct fit.
Solid Tungsten Carbide
- Wheel Diameter: 35mm
- Arbor Length: 33.15mm
- Arbor Diameter: 4.14mm
All dimensions are approximate and care must be taken to measure the wheel before building the machine to ensure you get the correct fit.