
16mm Tungsten Carbide Burr 90 Degree Countersink
- 16mm diameter (5/8")
- 90 degree angle
- 6mm Shank (1/4")
- 8mm cutting length
- Single Cut
Solid Tungsten Carbide 90 Degree Countersink or V-bit cutting burr. 16mm x 13mm on a 6mm (1/4") shank. Ideal for V-carving; the tip for cutting into narrow spaces and the bottom for cutting larger areas. Create sharp corners and remove material with ease. Ideal for beveling, counterboring, chamfering and for getting into acute angled areas of your work. Sometimes referred to as carbide cone burrs. For use on metals, stone, reinforced plastics, fibreglass and hard wood.
Use with your rotary tool, CNC machine or die grinder. Cutting speed should not exceed 35,000 RPM.
Technical
Tungsten Carbide cutting burr. Single Cut
- Shape: 90 Degree Countersink or carbide cone burr
- Cut: Single cut
- Diameter: 16mm (5/8")
- Cutting length: 8mm
- Shank: 6mm (1/4")
Questions & Answers
Ask a question using the form below
Other questions and our answers
What is the tool life of one of these burr tools?
Jacob Sellhausen
This all depends on many factors such as what material you are using them on and the composition of that material, and the skill of the operator, and therefore cannot be given a finite measurement.