Bobbie Coleman uses small diamond drill bits for her glass art and mixed media hangings.
Bobbie Coleman's Sea Glass, Beach Pottery and Driftwood Hanging
Pete's Pots Soap Dish
The holes in this soap dish with hand-carved bamboo supports get blocked with glaze, so Pete from Pete's Pots uses our diamond core drills to clear them.
Boodi Blu Jewellery
'To create Boodi Blu jewellery I drill holes into the china using a Dremel drill and Eternal Tools diamond drill bits. I use a 0.75mm or 1mm diamond drill bit. Holding the china underwater...
Fire Bulbs by Eugene Stevenson
Artist Eugene Stevenson carves up light bulbs using small diamond slitting discs then photographs them as he 'puts them to death'. His next project is to carve a tree into the side of a light bulb using diamond point burs (rats tail burs) and core drills.
Green Glass Mountain
Lorraine at Ten Green Bottles uses our small diamond drill bits, burs and small diamond grinding wheels for helping to make their recycled glass buttons, jewellery, plaques and house objects.
Engraved Clock Plate
David Davey's picture of a clock plate. He used our small diamond grinding wheels to make the engravers for the intricate work seen here.
Kriket Broadhurst Sea Glass Bangle
This bracelet and others by Kriket Broadhurst was made using our small diamond drill bits and will be submitted for display as part of an exhibition at the LLangollen International Eisteddfod and The Anglesey show.
Masterful Mosaics 'Seduced'
Kyle from Masterful Mosaics had to use many different sized diamond grinders for this piece so the use of our Dremel Multi Chuck came in handy so that he didn't have to keep changing collets.
Mike Flood Glassware Sculptures
Sculptor and artist, Mike Flood created this giraffe and tortoise completely out of glassware and crockery for the leading cutlery and glassware company, John Artis. By using diamond core drills; and a steady hand! these wonderful creations were made.
Balance Staff. Watch Services
Mark from Watch Services shows us a new balance staff he has made, mounted in his Jacot tool ready to be burnished, and tells us the tools he used to help him with the project.