Sapphire Burnishers

TIP: Increase the cross grain with a diamond file

Description

Our most superior pivot polisher is our sapphire burnisher. Suitable for polishing pivots to a glass finish they have a very slight burnishing grain on them that can be exaggerated with the use of a fine diamond file. These burnishers are a real professional tool and the feedback has been tremendous. If you want immaculate pivots then this is the tool for you.

How to use our Sapphire Burnishers

While you turn the pivot in your lathe offer up the sapphire burnisher applying very light pressure.

Technical

• Sapphire Burnisher: 12mm x 1.5mm x 2.5mm x 120mm (overall length) x 6.32mm Hex Handle

What our customers say

"Before purchasing a sapphire burnisher I used a conventional steel burnisher with good results however the sapphire has always provided a superb finish better than I could ever achieve with the steel." G.M. Cardew

"The sapphire burnisher is magic! I can now make brilliant pivots with little effort. The cap now never comes off the burnisher end of my old combined steel file/burnisher." Terry Hunt

• |
• epsilis web design and seo
• |