Large Diamond Files

TIP: Touch up Carbide Tools, End Mills etc.

Description

Our diamond needle files are unique, they have been designed and produced with precision in mind. With two different diamond grades to choose from you are always ensured to have the right file for the job. Our coarser and larger diamond needle files are perfect for roughing out and taking out heavy pitting in very hard materials. Our medium grade is our most popular and will remove material at a rapid rate whilst leaving a good finish.

How to use our Large Diamond Files

Our diamond needle files can be used either wet or dry, they will last longer when used wet but it is understood that this isn't always practical when working on a delicate watch or clock part. As with all our products allow the tool to do the work and don't apply too much pressure especially if working on a corner or sharp edge.

Technical

• Large Files: Overall Length 180mm x 5mm Shaft to Handle x 70mm diamond length

What our customers say...

"I have used my set of 4 diamond files in a number of ways. Re-facing clock pallets – the different shaped diamond files allow you to get in where it would be difficult to reach with a grindstone. Fitting clock and watch glasses – ease it by running a diamond file gently round the edge. Drilling holes in barometer glass to fit centre hand – I sometimes ease the hole using a round diamond file. Repivotting in a clock – I use a diamond file to rough up a piece of blued steel prior to fitting in the hole. When turning blued steel you can form a glazed surface which is not easy to cut through with a graver. I cut through it with a diamond file." Clive Driscoll

"Diamond Files are my favourite tools because of the large amount of pivot work I do. I can’t imagine getting along without diamond files. I can’t imagine getting along without my diamond wheel either. Good news is I don’t have to do without either." Robert Uhrich

• |
• epsilis web design and seo
• |